DIY Glasses case for Father’s Day
This one is cool and simple too!
http://www.petitexxs.com/2010/11/easy-diy-glasses-case-tutorial.html
I thought this one was superrrr adorable! Oh my goodness! So I tried it out! :D It’s Kansas and South Carolina!
omw, I love it!!! (: I can’t wait to do mine<3 Thanks for sharing (:
I had these black wedges that I didn’t really wear because they were kinda plain and boring. But, I thought that by adding some spark to the wedges, these babies would look like new. So, I bought a pack of silver thumbtacks (they come in gold, white, and other colors) and then I hammered them into the wedge. I used a small hammer, but be careful not to hammer your fingers. First I made a line of tacks at the top and I used that line as a guide for the rest. Just keep hammering then in as you like. I’m really happy with my outcome!
Submitted by: www.lachicabelle.tumblr.com
DIY hair clip
1) take an old fabric brooch (I got mine off of a cardigan I had)
2) unstitch from fabric if need be. add/modify the piece (I made some of the middle jewel pieces dangly for a cute twist)
3) remove pin back if need be. hot glue gun to plain barrette or hair clip
4) wear with confidence & style! :)
Hemp Pendant Lamps
How to make hemp string pendant lamps
Supplies and tools
- bouncy balls of various sizes
- clear drying craft glue (about 1 bottle per ball) such as Aleene’s Clear Gel Tacky Glue
- hemp string 20lb. weight
estimated amounts needed:
16 inch diameter ball—400 yards
14 inch diameter ball—300 yards
9 inch diameter ball—100 yards - plastic gloves (optional)
- trash bag or small drop cloth
- permanent marker
- ball inflating needle (available at sporting goods stores or bike shops)
- light fixture and hardware (any one of these pendant fitters at Lowe’s, Ikea’s Januari cord set or Hemma cord set will work)
1. Draw a circle on the ball with a permanent marker. This circle will mark a space on the lamp that needs to remain clear of string. The empty circle will be used in assembling the light fixture and will allow you to have access for changing light bulbs. If the light fixture you are using has lamp shades, make sure that the circles are big enough for the shades to easily pass through.
2. Cover your work surface with trash bags or a drop cloth, and put on gloves (this gets messy).
3. Squeeze a quarter size amount of glue onto your fingers and run the hemp string through the glue and then wrap it around the ball. The string should stick fairly easily to the ball. You can fill a shallow tub with the glue and run the hemp string through it, or you can apply the glue directly to the string from the bottle.
4. Glue and wrap, glue and wrap, glue and wrap. Just keep going. Try to wrap randomly to avoid criss-cross patterns. The more densely wrapped the lamp is the stronger it will be.
5. Make sure to avoid wrapping string over the circle area. If there are any areas that seem weak, you can apply a little extra glue to give it more strength.
6. Repeat the steps 1-5 to make multiple lamps. Let the glue dry completely. (The glue I recommended takes about 48 hours to cure completely.)
7. Use the inflating needle to deflate the ball.
8. Remove the deflated ball from the lamp.
9. This part takes some basic electrical skills. Follow the installation instructions that come with your light fixture. While installing the light string, feed the wires through the circle hole of the lamp and up through the top, so that the light bulb will hang down in the center of the sphere.
I love this so much! I can’t wait to try it (: Thanks for the submission. Submitted by: sarahannc
Paint your own cups; I thought this was a great idea! I so want to try it :)
Submitted by: lovelydreamms
So cute! I love it (:
